Choosing the Right Castor Wheels

Choosing the Right Castor Wheels

  • Why Your Tyre Puncture Woes Could Be a Thing of the Past

    If you spend a lot of time driving on unsealed roads or in areas where you're at risk of picking up a puncture, you may have had enough of replacing tyres on your vehicle and are looking for some alternatives. It can be difficult to loosen the wheel nuts to remove the rim in the first place and this task is especially challenging in adverse weather, but did you know that you can fit tyres that are designed to keep on going whenever they sustain a puncture?

  • How Can You Get the Best Out of Your Car Tires?

    An important part of car service is properly taking care of your wheels and tires. Poor tire maintenance is not only a significant risk while on the road, it also causes you to incur greater repair and maintenance cost to your vehicle. Motorists that take proper care of their tires often experience significant savings over the lifetime of their vehicle, get better fuel economy while on the road, and ensure the safety of themselves and their passengers.

  • 3 Safety Tips When Operating Machines Using Earthmoving Tyres

    Earthmoving tyres are built to carry huge loads which makes them bigger and stronger than conventional tyres. However, precautions need to be taken when using these tyres to ensure that they are in good condition. Any mistakes can cause significant damage to the heavy equipment or the operators. Below are some safety tips that heavy equipment operators should observe when dealing with earthmoving tyres. Always inspect for damage Earthmoving tyres are usually used in extremely rough areas such as in coal mines.

  • Nails in the Rubber: Checking Your Auto Tyres For Damage

    If you want to keep your car in excellent condition, you should carry out regular inspections on it. One area you should always pay attention to is your tyres. Because the tyres are the one part of your car which is in constant use even when the car isn't moving, and the engine isn't running, they can take a lot of wear and tear. Below is a guide to inspecting your car tyres.

  • 4 Tyre Bead Defects You Should Investigate

    You can reduce how often you need to buy new tyres by investigating and addressing the issues that cause your vehicle's tyres to fail prematurely. Below are some of the tyre-bead defects that can shorten the life of vehicle tyres. Bead Deformation The tyre bead refers to the edge of the tyre that makes contact with the wheel. This section of the tyre can become deformed, especially if the car is a four wheel drive that is taken through rough roads, to the extent that gaps can be seen between the wheel and the tyre.

2018© Choosing the Right Castor Wheels
About Me
Choosing the Right Castor Wheels

When I decided to install some new movable equipment in my industrial unit, I set about designing a trolly which could accommodate it. I found this process pretty easy until I had to fit the wheels. It seemed that no matter what type of wheel unit I used, it was very hard to control the trolly. I was about to give up when I mentioned my problem to my brother. He put me in touch with a guy who is a wheel specialist. He recommended I use a particular type of castor wheel. I followed his advice and it worked great! I hope you like my blog.

Categories
Archive