Choosing the Right Castor Wheels

Choosing the Right Castor Wheels

  • 3 Safety Tips When Operating Machines Using Earthmoving Tyres

    Earthmoving tyres are built to carry huge loads which makes them bigger and stronger than conventional tyres. However, precautions need to be taken when using these tyres to ensure that they are in good condition. Any mistakes can cause significant damage to the heavy equipment or the operators. Below are some safety tips that heavy equipment operators should observe when dealing with earthmoving tyres. Always inspect for damage Earthmoving tyres are usually used in extremely rough areas such as in coal mines.

  • Nails in the Rubber: Checking Your Auto Tyres For Damage

    If you want to keep your car in excellent condition, you should carry out regular inspections on it. One area you should always pay attention to is your tyres. Because the tyres are the one part of your car which is in constant use even when the car isn't moving, and the engine isn't running, they can take a lot of wear and tear. Below is a guide to inspecting your car tyres.

  • 4 Tyre Bead Defects You Should Investigate

    You can reduce how often you need to buy new tyres by investigating and addressing the issues that cause your vehicle's tyres to fail prematurely. Below are some of the tyre-bead defects that can shorten the life of vehicle tyres. Bead Deformation The tyre bead refers to the edge of the tyre that makes contact with the wheel. This section of the tyre can become deformed, especially if the car is a four wheel drive that is taken through rough roads, to the extent that gaps can be seen between the wheel and the tyre.

  • 3 Dual Tyre Mistakes You Should Avoid

    Do you own a car or a truck that has dual tyre positions at the back? Below are some of the key mistakes that you should avoid making to match the dual-wheel position tyres correctly. Not matching the inflation It is important to check the inflation of the tyres in the dual-wheel positions so that no mismatch in tyre pressure exists. Any discrepancy that exists in their inflation level will cause some problems.

  • How To Prolong The Service Life Of Truck Tyres

    The cost of buying and maintaining truck and crane tyres can quickly add up if you do not have a deliberate programme to use them efficiently. Below are some measures that you can take to increase the interval between buying replacement truck tyres. Pay attention during specification and selection Vehicle manufacturers always provide tyre specifications for the different vehicles that they make. However, those specs are only aimed at narrowing down the options of the tyres that can work without causing handling and stability problems.

2022© Choosing the Right Castor Wheels
About Me
Choosing the Right Castor Wheels

When I decided to install some new movable equipment in my industrial unit, I set about designing a trolly which could accommodate it. I found this process pretty easy until I had to fit the wheels. It seemed that no matter what type of wheel unit I used, it was very hard to control the trolly. I was about to give up when I mentioned my problem to my brother. He put me in touch with a guy who is a wheel specialist. He recommended I use a particular type of castor wheel. I followed his advice and it worked great! I hope you like my blog.

Categories
Archive