Choosing the Right Castor Wheels

Choosing the Right Castor Wheels

  • 3 Dual Tyre Mistakes You Should Avoid

    Do you own a car or a truck that has dual tyre positions at the back? Below are some of the key mistakes that you should avoid making to match the dual-wheel position tyres correctly. Not matching the inflation It is important to check the inflation of the tyres in the dual-wheel positions so that no mismatch in tyre pressure exists. Any discrepancy that exists in their inflation level will cause some problems.

  • How To Prolong The Service Life Of Truck Tyres

    The cost of buying and maintaining truck and crane tyres can quickly add up if you do not have a deliberate programme to use them efficiently. Below are some measures that you can take to increase the interval between buying replacement truck tyres. Pay attention during specification and selection Vehicle manufacturers always provide tyre specifications for the different vehicles that they make. However, those specs are only aimed at narrowing down the options of the tyres that can work without causing handling and stability problems.

  • 4 Things Mechanics Should Never Do When Repairing Tyres

    Car tyres can develop defects, such as punctures, which can be repaired to avoid the higher cost of replacing those tyres with new ones. However, anyone attempting such repairs must know the specific things to avoid to limit the chance of an accident occurring due to improper tyre repairs. This article discusses some things that should never be done by mechanics who are attempting to repair damaged tyres. Never conduct repairs without removing the tyre

  • How To Inspect The Frames And Fasteners Of Castor Wheels

    Castor wheels can only last long if the frames and fasteners that are holding them in place are well maintained. It is, therefore, necessary for you to turn the equipment on its side so that you can inspect the frames and fasteners of the castor wheels regularly. Pay special attention to the aspects highlighted in the discussion below during this periodic inspection. Deck boards and welds Examine any welds on the frames or fasteners of the castor wheels.

  • 2018© Choosing the Right Castor Wheels
    About Me
    Choosing the Right Castor Wheels

    When I decided to install some new movable equipment in my industrial unit, I set about designing a trolly which could accommodate it. I found this process pretty easy until I had to fit the wheels. It seemed that no matter what type of wheel unit I used, it was very hard to control the trolly. I was about to give up when I mentioned my problem to my brother. He put me in touch with a guy who is a wheel specialist. He recommended I use a particular type of castor wheel. I followed his advice and it worked great! I hope you like my blog.

    Categories
    Archive